| Division |
Facilities |
Key function |
| ENTRY SECTION |
PAY OFF REEL(#1,2) |
Facility to continuously unroll raw material Coil |
| DOUBLE CUT SHEAR |
Facility to cut defective part of Top/End part |
| WELDER |
Facility to connect Top part and End part of the material Coil for continuous line work |
| ENTRY LOOPER |
Facility to store Strip to enable continuous work after Center process while connecting Top part and End part of the material Coil |
| ENTRY C.P.C |
Facility to Control to maintain Entry Strip Center |
| CENTER SECTION |
Pre-debinding |
Facility to saponify oil constituent on Strip surface |
| Electrolytic Degreasing ECT |
Process to remove oil constituent and foreign matter on the Strip surface |
| PickLing and Ni-Flushing |
Process for Ni-Flushing work to remove oxide-film on the Strip surface and to activate surface before coating |
| Coating CELL |
Coating process to manufacture electrical zincing steel sheet by supplying electricity to ionized zinc. |
| Dilute acid |
Process to secure uniformity of coating surface and to remove foreign matter |
| Surface adjustment |
Process to densify and refine crystal by creating phosphate core |
| Phosphate |
Process to form phosphate coating to increase corrosion resistance and paintability of galvanized Strip surface |
| Fingerprint resistance COATER |
Process to coat fingerprint resistance resin on electrical zincing steel sheet |
| EXIT SECTION |
EXIT LOOPER |
Process to coat fingerprint resistance resin on electrical zincing steel sheet |
| EXIT C.P.C |
Facility for control to maintain Exit Strip Center |
| SHEAR |
Process for shearing to divide product into proper weight and to shear Scrap |
| EXIT E.P.C |
Facility to uniformly wind Coil on the Tension Reel |
| TENSION REEL |
Facility to wind product to Coil (Demand controls required weight) |
> EG Business > Facilities line
